Loading...
Please wait until this completely loaded.

News

26 Nov 2015
by Nilton

How to Begin Using our Reseller Panel

Step 1:

Register a user account on our reseller webpage http://www.unlockscout.com/reseller/register.php

Step 2:

Contact us to apply for a wholesaler price.  (minimum charge is 50 Dollar)

Step 3:

Log into your user account: http://www.unlockscout.com/reseller/main.php

Step 4:

Add funds to your balancehttp://www.unlockscout.com/reseller//addfunds.php

(the first payment we need to approve it manually)

Step 5:

Place an order:

  1. Move your cursor over Place Order (do not click it). Choose Imei Servicesservice003
  2. Click on -Select- and type your “Device” or “Carrier”depend on the device you like to unlock. If you need some help which services you need to use, to unlock your device, please contact us via”LiveChat”, “Skype: awv-online”, or “Email: ebayduplex@gmail.com”.service001
  3. Choose your -Servicesservice002
  4. Insert your Imei and click Place Order. If you have more then one Imei you can insert your Imeis in the Bulk IMEI section. (If you insert your IMEI in the IMEI section, be careful the last number  will show up automatically. Check your IMEI again if the 15th digit are correct.)service004

Step 6:

Check your Order History. (For any unlock updates you can visit your Order History. )

  1. Move your cursor over Order History and click it. Here you can check the status of your pending orders. service005

 

 

10 Sep 2015
by Nilton

Unlock Samsung Galaxy S6 (SM-G920T) from T-Mobile USA

Step by Step Tutorial Firmware Upgrade
Samsung Galaxy S6 (SM-G920T) to MetroPCS Firmware

Disclaimer: UnlockScout is not responsible if users break / brick or damage their phone while trying to use this method. You must not use this firmware for any other Android Cell Phone other than the Samsung Galaxy S6 (SM-G920T) from T-Mobile USA. Do so at your own risk. If you’re not sure what you are doing, please seek assistance at a local cell phone service center in your area.

Step 1 (Preparation): 

  1. Galaxy S6:  Download the Special MetroPCS Firmware for Samsung SM-G920T.
  2. Download ODIN v3.10.0 Service Software using this link (NEW: Odin v3.10.5 or Odin v3.10.6)
  3. Make sure your phone battery is charged more than 60%.
  4. Enable USB Debugging, by open Settings > Developers Option > USB Debugging
    If Developers Option is hidden, go to Settings > About Phone > Built Number (tap on it for 5-8 times)
  5. Make sure you install the Samsung Galaxy S6 USB drivers on your PC, if you haven’t already.

Optional: Download the Original T-Mobile Firmware for Samsung SM-G920T.

Step 2 (Update Firmware): 

  1. Run Odin3 v3.10.0 as administrator (Right-Click: Run as Administrator).
  2. Switch OFF your Samsung Galaxy S6.
  3. Boot in download mode, by pressing the Volume Down + Home + Power Key simultaneously.
    Samsung Galaxy S6 (Boot Mode)
  4. When you see the screen below:Samsung Galaxy S6 Edge in Download ModeTap Volume Up button to enter Download Mode.
  5. Connect the Samsung Galaxy S6 to your PC with the USB cable.
    Odin will automatically detect your phone and show the “Added!” message.Samsung smartphone added to Odin
  6. In the Odin, click on AP or PDA and then choose :- For Galaxy S6 (SM-G920T) :G920T1UVU1AOCH_G920T1TMB1AOCH_TMB_HOME.tar.md5 file.
  7. Ensure Auto Reboot and F. Reset Time options are selected selected in Odin
    while the Re-Partition option is unchecked (this is very important).
  8. Click Start in Odin and wait for the software to update your phone.Odin press start to upgrade Samsung SM-G386T to MetroPCS Firmware
  9. Once the root installation is done, your phone will reboot
    and soon a PASS message with a green background appears in the left-most box at the very top of Odin.Odin3 finish pass
  10. You can close Odin after device turns on.
  11. Your Samsung Galaxy S6 is now fully updated with MetroPCS Firmware!

AFTER FLASHING A SAMSUNG GALAXY S6 FROM T-MOBILE WITH THIS FIRMWARE THE PHONE WILL FINALLY ASK FOR A NETWORK CODE WHEN YOU PUT A NON APPROVED CARRIER’S SIM CARD ON THE PHONE.

Samsung Galaxy S6 asking for "SIM Network Unlock PIN"

AFTER YOU HAVE UNLOCKED YOUR PHONE YOU CAN STILL FLASH A T-MOBILE FIRMWARE BACK TO THE DEVICE SO THAT IT GOES BACK TO ORIGINAL STOCK AND SO DOES NOT LOSE WARRANTY. BUT THE PHONE WILL RELOCK AS SOON AS YOU FLASH IT BACK WITH T-MOBILE FIRMWARE.

Troubleshooting : I am stuck on the SAMSUNG BOOT LOGO! What do I do?

First, do not worry, your phone is not broken. Simply follow the instructions below:

a. Wait at least 5 minutes to make sure you are stuck on the logo screen
b. Pull the battery out and wait 30 seconds, then put the battery back in
c. Turn the phone on by: HOLDING VOLUME UP + HOME + POWER you will soon see the RECOVERY page

Tip: when the phone turns on let go of the power button ONLY, when you see the recovery let go of everything

d. Scroll down to WIPE factory user data reset and select it
when prompted scroll to YES and select it to do a factory wiping

e. Scroll down to WIPE CACHE PARTITION and select it,
when prompted scroll to YES and select it to do a wipe on cache

Tip: Use the volume rockers to navigate and the power button to Select your option

f.  Reboot the phone, you should load properly now

24 May 2015
by john d

MetroPCS Mobile Device Unlock App (Android Official Unlock)

Device Unlock is an Android app that allows you to request and apply a MetroPCS mobile device unlock directly from the device. The features of this app include the ability to remotely request Mobile Device Unlock without having to contact Customer Care and automatically apply the Mobile Device Unlock to the device without the use of a manual code.

Thanks to this app, we’re now able to Register any IMEI as “Eligible” in the MetroPCS Database so you can unlock your Cell Phone using the “Device Unlock” App. Turnaround time for delivery is less than 2 Business Days. To officially unlock your MetroPCS Cell Phone using the Device Unlock App, please click here.

All you need is an Android device that supports the Mobile Device Unlock app:

  • LG Leon 4G LTE (MS345),
  • LG G Stylo (MS631),
  • Kyocera Hydro Elite (C6740).
  • Samsung S6
  • Samsung Prime
  • All Models using remote unlocking app

Once the unlock request is processed, customer needs to:

  1. Make sure you have an active data connection via 3G/4G/LTE or Wi-Fi.
  2. From the Application list, tap Device Unlock. (Note: The application may be located in the MetroPCS folder.)
  3. Tap Continue.
  4. Choose the Permanent Unlock type:
  5. If successful, restart the device to apply the settings.

metropcs-device-unlock-app-unlock-process

 

 

 

Note: If you do not restart the device, you will have a persistent alert in the notification tray.

WARNING:  It is very important to mention that the customer has to have data when attempting to perform the unlock, either 3G, 4G or wi-fi but data on the phone. If there is no data the unlock will be unsuccessful, once a device has been whitelisted we will not be responsible for unsuccessful unlocks. If customer has changed the original software or IMEI we will not be responsible for the app not to work (Do not install custom firmware like Avatar or Cyanogen  before unlock your phone). If customer cannot find the app on its phone he can easily go to applications and make it visible but a Hard Reset will always bring the app back to the phone.